Best Buy Youngstown Glove Co. 05-3080-70-M General Utility lined with KEVLAR Glove Medium, Gray Save Today!!
$29.99- Cut resistant DuPont™ Kevlar® lining throughout the entire glove; Palm rates a Cut Performance Level 3 rating according to ANSI/ISEA 105-2005 Standard; Non slip renforced fingers, palm, and thumb; Incredible durability and protection


Customer Rating :
Price on Sep 03, 2010 08:18:08 : $29.99
Offer Price : $20.99
Availability : Usually ships in 1-2 business days

Available at Amazon Get One Check Price Youngstown Glove Co. 05-3080-70-M General Utility lined with KEVLAR Glove Medium, Gray Now!


Youngstown Glove Co. 05-3080-70-M General Utility lined with KEVLAR Glove Medium, Gray Features
Youngstown introduces the world's first Cut-Resistant, Kevlar lined performance work gloveEvery inch of this glove (top, palm, side of fingers) is lined with DuPont Kevlar fiber for increased cut-resistance and durability.Youngstown style non-slip reinforcement covers the palm, fingers and thumb for enhanced grip, protection and extreme durabilityRates level 3 to ANSI/ISEA 105-2005 Cut Test StandardKevlar is a registered trademark of DuPont or its affiliates

» Read More

Youngstown Glove Co. 05-3080-70-M General Utility lined with KEVLAR Glove Medium, Gray

Best Buy Polypropylene Machine Screw, Binding Head, Slotted Drive, #4-40, 1/8" Length (Pack of 25) Save Today!!
- Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, » Read More

Polypropylene Machine Screw, Binding Head, Slotted Drive, #4-40, 1/8" Length (Pack of 25)

Best Buy Polypropylene Machine Screw, Pan Head, Phillips Drive, #6-32, 7/8" Length (Pack of 25) Save Today!!
- Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. » Read More

Polypropylene Machine Screw, Pan Head, Phillips Drive, #6-32, 7/8" Length (Pack of 25)

Best Buy Super Tough Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #2-56, 9/32" Length (Pack of 100) Save Today!!
- Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Super Tough Nylon is a modified Nylon 6/6 material which performs better at low temperatures. Impact Strength, as measured by the Izod impact test method (which measures force required to break material), is 17 pounds per foot. This is significantly tougher than standard Nylon 6/6, which is rated at 3 pounds per foot. Tensile strength is estimated to be 11,600 psi (pounds per square inch) at -40 degrees Fahrenheit. Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces, it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use.

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; t » Read More

Super Tough Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #2-56, 9/32" Length (Pack of 100)

Best Buy Industrial Grade 1WMY9 Ball Valve, Two Piece, 3 In, 316 SS Body Save Today!!
- Two Piece Ball Valve, Size 3 In, FNPT Connection, Max Pressure 1000 PSI WOG, Full Port, Material of Construction 316 Stainless Steel, Seats PTFE, Ball Material 316 Stainless Steel, Stem Material 316 Stainless Steel, Stem Blowout Proof, Handle Stainless Steel, Lockable, With Vinyl Grip, Temp. Range -25 To 450 F, Overall Length 7 29/64 In.





Availability : Usually ships in 1-2 business days

Available at Amazon Get One Check Price Industrial Grade 1WMY9 Ball Valve, Two Piece, 3 In, 316 SS Body Now!





Compare Price


» Read More

Industrial Grade 1WMY9 Ball Valve, Two Piece, 3 In, 316 SS Body

Best Buy Northern Industrial Cutoff Wheels - 2 7/8in. Dia. Save Today!!
- Wheel Diameter (in.): 2 7/8, Wheel Thickness (in.): 1/8, Arbor Size (in.): 3/8, Wheels (qty.): 10





Availability : Usually ships in 1-2 business days

Available at Amazon Get One Check Price Northern Industrial Cutoff Wheels - 2 7/8in. Dia. Now!





Compare Price


» Read More

Northern Industrial Cutoff Wheels - 2 7/8in. Dia.

Best Buy Industrial Grade 1EVA5 Fliter Bag, Poly Felt, 100 Microns, PK 5 Save Today!!
- Filter Bag, Material of Construction Polypropylene Felt, Max Flow GPM 100, Microns 100, Filter Size 1, Dia 7 In, Length 16 1/2 In, Area 2.0 Square-Ft, Max Temp 200 F, Natural Finish, Ring Material Plastic, Package Quantity 5





Availability : Usually ships in 1-2 business days

Available at Amazon Get One Check Price Industrial Grade 1EVA5 Fliter Bag, Poly Felt, 100 Microns, PK 5 Now!





Compare Price


» Read More

Industrial Grade 1EVA5 Fliter Bag, Poly Felt, 100 Microns, PK 5

Best Buy Industrial Grade 2VAE6 Disc Magnet, Rare Earth, 6.5 Lb, 0.709 In Save Today!!
- Disc Magnet, Rare Earth, Thickness 0.118 In, Dia 0.709 In, Size 0.1 Oz, Max Pull 6.5 Lb, Stability Temp 300 Deg F, Sintered Neodymium, Nickel-plated





Availability : Usually ships in 1-2 business days

Available at Amazon Get One Check Price Industrial Grade 2VAE6 Disc Magnet, Rare Earth, 6.5 Lb, 0.709 In Now!





Compare Price


» Read More

Industrial Grade 2VAE6 Disc Magnet, Rare Earth, 6.5 Lb, 0.709 In